To ensure the safety of your car,you need to follow the tips

Car maintenance is simple, nothing too big a risk, but if you don't pay attention to safety, or unpleasant things happen, such as minor injuries in car care, exposure to engine exhaust gases and toxic liquid splash.Therefore, maintain vehicles themselves, in terms of security there are nine bogeys.

Avoid unventilated garage running engine for a long time.Emissions from the engine contains carbon monoxide, which is a sight and smell of gas.In a long time at a low concentration of carbon monoxide gas, can cause headaches, shortness of breath, nausea, vomiting, weakness dazzled even brain damage, mental confusion and other symptoms.Start the engine in the garage, the garage door should be open or open drainage devices in order to keep the emissions out of the garage.Open work, don't work with long stay near the engine exhaust pipe.

Forbidden mouth suction pipe.Gasoline not only flammable and toxic.In particular, leaded gasoline will damage the nervous system, digestive tract, and kidney.In addition, also contains high concentrations of sulfur compounds in gasoline, due to the toxicity of hydrogen sulfide has some, if inhaled petrol inside, could result in poisoning or death.In case of inhalation should be forcing their own vomit and hospital treatment in a timely manner.

Avoid stained with carburetor cleaner. Most of the carburetor cleaning agent contains methylene chloride, and aromatic alcohol, which has a certain toxic substances, these substances are inhaled intranasally or splash on the skin and eyes, are very dangerous.

Avoid mechanical damage. Associated with the maintenance of the car in all aspects, during the maintenance operation, the operation should be set clear signs, to prevent misuse of other people hurt. At the start the car, you should pay attention to the transmission gear case to prevent the car malfunction wounding. Working under the hood, you should let other people leaving the cab, to prevent the engine suddenly turning or others operated control, resulting in fire. If you need to work under the vehicle, you should set clearly marked, and the car cover car with wooden cover is good. Support car with a jack, jack to be placed flat. Motorists should be prepared before driving tool (driving stool), prohibit the use of bricks and other breakable objects. In the mounting assembly, do not hand exploratory holes, keyhole, and in order to avoid rolling off the fingers. Test engine shall not operate under the car.

Avoid fire.At the time of vehicle maintenance, often need to use oil, flammable, explosive materials, such as cleaning agents, don't forget to fire prevention measures, fire extinguisher ready just in case.Close to the fuel tank and battery, do not smoke, because the combustible gases escape the tank and batteries escape of hydrogen is very easy to ignite.

Avoid burns. Just turn off the engine, the engine parts (tanks, exhaust pipes, power steering fluid tank and plugs) temperature is higher, the contacts must be careful to avoid burns. If the engine temperature is high, do not remove the radiator cap or loosen the drain switch, to prevent burns.

What's more, you can know more car tools like VAG Diagnostic Tool to do better.

Here is the hot one:

GS 911 is a unique software and hardware combination that allows the BMW enthusiast the ability to communicate with the control modules in a safe and controlled manner.

Advantages:

In the true spirit of adventure associated with your motorcycle, the GS 911 tool is also available with a Bluetooth interface, allowing you to use it with most modern mobile phones (including BlackBerry)...No need for anything else.

Read Diagnostic Fault Codes
This shows the Fault codes and text descriptions of the faults stored on the Electronic Control Unit.
Shows ECU information
See hardware and software versions, manufacturing dates, and other manufacturer related data.
Clears Diagnostic Fault Codes
Enables you to erase fault codes once the problem has been fixed.
Real-time Analog and Digital values for Engine control units
view and log the real-time values (very dependent on the type of controller)