Canalblog
Editer l'article Suivre ce blog Administration + Créer mon blog
Publicité
Heavy Duty Truck Tech Notice - Truck Scanner
22 avril 2013

CHRYSLER A500/518 - BIND UP ON 3-4 SHIFT

COMPLAINT: Bind-up on a 3-4 shift, after overhaul.

CAUSE: The cause may be, the overdrive direct clutch reaction plate installed upside down on the sliding clutch hub.

CORRECTION: Install the overdrive direct clutch reaction plate with the counterbore side facing down, so that the counterbore fits over the lugs of the direct clutch sliding hub, as shown in Figure 1. The reaction plate, when installed correctly, should be flush with the end of the sliding hub, as shown in Figure 1.

NOTE: To determine the amount of friction plates and steel plates that belong in the overdrive direct drum, measure the distance between the snap ring groove and the top of the drum as shown in Figure 2. Use the chart in Figure 2 to select the number of clutch plates, depending on the measurement.

You may need some hot car tools like Tachosoft Mileage Calculator and Volvo Vida Dice for help on auto repair, you can visit www.vtoolshop.com.

 

Publicité
Publicité
Commentaires
Heavy Duty Truck Tech Notice - Truck Scanner
  • It is an universal diagnostic tools for heavy duty truck. Update from develope models, feel quality, good warranty, it is the most popular tools for heavy duty truck. Except X431 HEAVY DUTY, you can also find CARMAN SCANNER, MUT 3, Volvo VCADS3.
  • Accueil du blog
  • Créer un blog avec CanalBlog
Publicité
Archives
Publicité